COSMOGAS Adveco MYDENS 15B, Инструкция по установке, использованию и техническому обслуживанию, Страница: 14 / 96

14
MYDENS COSMOGAS
5 - INSTALLATION
5.1 - Packaging opening
Take the product out of the carton box and remove any
protective film.
5.2 - Dimensions and minimum safety
distances
a
WARNING!!! For installation and maintenance,
it is necessary to leave free spaces around the
appliance. See the Figure 9.
Figure 9
Figure 10
Key of Figure 10
1 = heating supply
3/4" in the 15 and 24 models
1" in the 34 models
2 = 1/2" DHW outlet (“P” models only)
2 = 3/4" tank supply (“B” models only)
2 = (absent only in "C" models)
3 = 3/4" tank return (“B” models only)
4 = 3/4" gas inlet
5 = 1/2" cold water inlet
6 = heating return
3/4" in the 15 and 24 models
1" in the 34 models
7 = flue exhaust
8 = wall hang connections
9 = Ø20 condensate drain
5.3 - Choosing the installation place
a
WARNING!!! The appliance must be installed
exclusively on a solid and vertical wall, which can
bear the weight.
The appliance can be installed inside or outside your home,
otherwise protected from atmospheric agents such as rain,
wind, sun, and especially freezing.
Choose the room and suitable position for installation taking
into account the following factors:
- connection of the flue exhaust/air intake pipes;
- connection of the gas supply pipe;
- connection to the water supply;
- connection to the central heating system;
- connection to the domestic hot water system;
- electrical connection;
- connection to the drain for the condensate produced by
the appliance;
- electric connection of the room thermostat;
- possible connection to safety valve outlet;
- possible connection to the outdoor temperature sensor;
a
WARNING!!! This appliance must be installed
in a place where water leakages from the appliance
itself, from the joints between the pipes or from any
drainage from the safety valve, cannot cause damage
to materials or items below it.
a
WARNING!!! The room where this appliance is
installed must have a water collection and discharge
point for any leakage.