COSMOGAS Adveco MYDENS 15B, Инструкция по установке, использованию и техническому обслуживанию, Страница: 16 / 96

16
MYDENS COSMOGAS
5 - INSTALLATION
Total heating
output
Water hardness at specific system volume *
≤ 20 l/kW > 20 l/kW ≤ 50 l/kW > 50 l/kW
kW °f mol/m3 °f mol/m3 °f mol/m3
< 50 < 30 < 3 20 2 0,2 0,02
> 50 ≤ 200 20 2 15 1,5 0,2 0,02
> 200 ≤ 600 15 1,5 0,2 0,02 0,2 0,02
> 600 0,2 0,02 0,2 0,02 0,2 0,02
* Nominal capacity in litres/heating output; in the case of multiboiler systems, the smallest single heating output is to be
used.
Figure 11
a
WARNING!!! The use of unsuitable additives
for the heating circuit can cause damage to the
appliance and the circuit!
Unsuitable additives may cause changes in the
components, noises in heating mode and possibly
subsequent damage.
d
The use of unsuitable frost and corrosion
protection agents, biocides or sealants is absolutely
prohibited.
l
No incompatibility with our products has been
detected to date with proper use of the following
additives.
l
When using additives, follow the manufacturer’s
instructions without exception.
l
The manufacturer accept no liability for the
compatibility of any additive or its effectiveness in the
rest of the heating system.
l
Inform the end user about the measures required for
above-mentioned additives.
l
Inform the end user about the measures required for
frost protection.
d
It is absolutely forbidden to use the following
additives in the sanitary water circuits.
Additives for cleaning measures (subsequent flushing
required)
- Maychem Mayline SB
- Fernox F3
- Sentinel X 300
- Sentinel X 400
Additives intended to remain permanently in the
installation
- Maychem Mayline SBA
- Fernox F1
- Fernox F2
- Sentinel X 100
- Sentinel X 200
Additives for frost protection intended to remain
permanently in the installation
- Maychem Mayline FS
- Fernox Antifreeze Alphi 11
- Sentinel X 500