CLIFFORD MATRIX 70.5X, Руководство по установке

Страница: 50 / 70

© 2006 Directed Electronics—all rights reserved
0
To access another feature in the same menu:
1. Press and release the Valet/Program switch the number of times necessary to advance from the feature
you just programmed to the next one you want to program.
2. Then press the Valet/Program switch once more and
HOLD
it.
For example, if you just programmed the third feature in the menu and you would like to program the
seventh feature in the menu, you would press and release the Valet/Program switch four times and then
press it once more and
HOLD
it. The siren would chirp seven times to confirm access to the seventh
feature.
To select another menu:
1. Press and hold the Valet/Program switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating which
menu has been accessed.
For example, if you just programmed some features in the first menu and you want to program a feature
in the third menu, press and
HOLD the Valet/Program switch. After three seconds, the siren chirps twice
indicating access to the second menu. Continue to
HOLD
the button and three seconds later the siren will
chirp three times indicating access to the third menu. Features in the third menu are then programmable
following steps 4 through 6 of the System Features Learn Routine procedure.
To exit the learn routine:
The learn routine will be exited if any of the following occurs:
1. Close the open door.
2. Turn the ignition on.
3. There is no activity for longer than 15 seconds.
4. The Valet/Program switch is pressed too many times.