Configuring Security
Defining Users
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide
230
17
Protection from other network users is described in the following sections. These
are attacks that pass through, but are not directed at, the switch.
•
Denial of Service Prevention
•
Configuring TCP/UDP Services
•
Defining Storm Control
•
Configuring Port Security
Defining Users
The default username/password is
cisco
/
cisco
. The first time that you log in with
the default username and password, you are required to enter a new password.
Password complexity is enabled by default. If the password that you choose is not
complex enough (
Password Complexity Settings
are enabled in the
Password
Strength
page), you will be prompted to create another password.
Setting User Accounts
Setting User Accounts
The
User Accounts
page
enables entering additional users that are permitted to
access to the switch (read-only or read-write) or changing the passwords of
existing users.
NOTE
It is not permitted to delete all users. If all users are selected, the
Delete
button is
disabled.
To add a new user:
STEP 1
Click
Administration
>
User Accounts
. The
User Accounts
page displays.
This page displays the users defined in the system.
STEP 2
Click
Add
to add a new user or click
Edit
to modify a user. The
Add (or Edit) a User
Account
page displays.
STEP 3
Enter the parameters.
•
User Name
—Enter a new username between 0 and 20 characters. UTF-8
characters are not permitted.
