Managing Power-over-Ethernet Devices
Configuring PoE Properties
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide
154
11
Output power is disabled during power-on reboot, initialization, and system
configuration to ensure that PDs are not damaged.
To configure PoE on the switch and monitor current power usage:
STEP 1
Click Port Management > PoE > Properties. The
PoE Properties
page opens.
STEP 2
Enter the values for the following fields:
•
Power Mode—Select one of the following options:
-
Port Limit
—The maximum power limit per each port is configured by the
user.
-
Class Limit
—The maximum power limit per port is determined by the
class of the device, which results from the Classification stage.
•
Traps—Enable or disable a SYSLOG trap.
•
Power Trap Threshold—Enter the usage threshold that is a percentage of
the power limit. An alarm is initiated if the power exceeds this value.
The following counters are displayed:
•
Nominal Power—The total amount of power the switch can supply to all the
connected PDs.
•
Consumed Power—Amount of power currently being consumed by the PoE
ports.
•
Available Power—Nominal power - the amount of consumed power.
STEP 3
Click Apply to save the PoE properties.
