7-31
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 7 Installing the IPS 4510 and IPS 4520
Rack-Mounting the Chassis Using the Fixed Rack Mount
Step 2
Position the front bracket on the side of the sensor and line up the bracket screws with the screw holes
on the sensor.
Step 3
Tighten the screws in to the chassis.
Step 4
Repeat the procedure on the other side of the chassis.
Step 5
Mount the chassis in a rack. Go to Step 12. If using the optional slide rails, go to Step 6.
Step 6
(Optional) Attach one of the rear brackets using three M4 screws.
Step 7
(Optional) Repeat the procedure to attach the second bracket to the other side of the chassis.
Step 8
(Optional) Measure the distance between the front and rear rack rails and select the proper slide-mount
brackets.
Note
The slide-mount brackets let you install the rear of the chassis to the rear rack rails. The brackets
are designed to slide within the installed rear brackets and accommodate a range of rack depths.
1
Bracket
2
Bracket screws
1
2
2
2
PWR
BOO
T
ALARM ACT
VPN
PS1
HDD1
PS0
HDD0
USB
RESET
0
SFP1
SFP0
1
0
1
2
3
4
5
6
7
MGMT
0
1
AUX
CONSOLE
Cisco IPS 4510
PWR
BOO
T
ALARM ACT
VPN
PS1
HDD1
PS0
HDD0
USB
RESET
0
SFP3
SFP2
SFP1
SFP0
1
0
1
2
3
4
5
MGMT
0
1
AUX
CONSOLE
331821
PWR
BOO
T
ALARM ACT
VPN
PS1
HDD1
PS0
HDD0
USB
RESET
0
SFP1
SFP0
1
0
1
2
3
4
5
6
7
MGMT
0
1
AUX
CONSOLE
Cisco IPS 4510