E-16
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-04
Appendix E Configuring the Client Adapter through Windows XP
Configuring the Client Adapter
Enabling EAP-SIM Authentication
Follow the steps below to prepare the client adapter to use EAP-SIM authentication, provided you have
completed the initial configuration.
Note
PC-Cardbus cards do not support EAP-SIM authentication.
Step 1
Click the Authentication tab on the Wireless Network Connection Properties screen. The following
screen appears (see
Figure E-9
).
Note
When Service Pack 1 for Windows XP is released, the Authentication tab may move from its
current location. To access it, click the Wireless Networks tab, select the network that you
are configuring in the Preferred network list, and click Properties.
Figure E-9
Wireless Network Connection Properties Screen (Authentication Tab)
Step 2
Select the Enable network access control using IEEE 802.1X check box.
Step 3
For EAP type, select SIM Authentication.
Step 4
Click Properties. The SIM Authentication Properties screen appears (see
Figure E-10
).
