5-33
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-04
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Step 4
Perform one of the following:
•
If you selected Use Temporary User Name and Password in
Step 3
, select one of the following
options:
–
Use Windows User Name and Password—Causes your Windows username and password to
also serve as your LEAP username and password, giving you only one set of credentials to
remember. After you log in, the LEAP authentication process begins automatically. This option
is the default setting.
–
Automatically Prompt for LEAP User Name and Password—Requires you to enter a
separate LEAP username and password (which are registered with the RADIUS server) in
addition to your regular Windows login in order to start the LEAP authentication process.
–
Manually Prompt for LEAP User Name and Password—Requires you to manually invoke
the LEAP authentication process as needed using the Manual LEAP Login option from the
Commands drop-down menu. You are not prompted to enter a LEAP username and password
during the Windows login. This option might be used to support a software token one-time
password system or other systems that require additional software that is not available at login.
•
If you selected Use Saved User Name and Password in
Step 3
, follow the steps below:
a.
Enter a username and password in the appropriate fields.
Note
Usernames and passwords are limited to 32 ASCII characters each. However, if a
domain name is entered in the Domain field, the sum of the username and domain name
is limited to 31 ASCII characters.
b.
Re-enter the password in the Confirm Password field.
c.
If you wish to specify a domain name that will be passed to the RADIUS server along with your
username, enter it in the Domain field.
Step 5
If you work in an environment with multiple domains and, therefore, want your Windows login domain
to be passed to the RADIUS server along with your username, select the Include Windows Login
Domain With User Name check box. The default setting is selected.
Note
If you selected to use a saved username and password but do not select the Include Windows
Login Domain With User Name check box, the Domain field becomes unavailable, and a domain
name is not passed to the RADIUS server.
Step 6
If you want to force the client adapter to disassociate after you log off so that another user cannot gain
access to the wireless network using your credentials, select the No Network Connection Unless User
is Logged In check box. The default setting is selected.
Step 7
In the LEAP Authentication Timeout Value field, enter the amount of time (in seconds) before a LEAP
authentication is considered to be failed and an error message appears.
Range: 30 to 300 seconds
Default: 90 seconds
