14-31
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1000 Series DIMM Memory Modules
Step 2
After the power supplies are removed, remove the chassis top cover by performing the following steps:
a.
Loosen all top surface screws on the chassis cover, as shown in
Figure 14-21
, callout 3.
b.
Loosen the three screws on the faceplate at the front of the chassis, as shown in
Figure 14-21
, callout
6.
Figure 14-21
Removing the Cisco ASR 1001 Router Cover
c.
Using both hands, gently slide the cover forward and off of the chassis.
Note
The cover will not come off the chassis if the power supplies are present in the chassis.
d.
Place the cover aside while wearing an antistatic device, such as a wrist strap.
Step 3
Position the chassis so that you are facing the front of the chassis to remove the DIMM.
Step 4
Locate the DIMM on the ASR 1001 Router. See
Figure 14-20
, callout 1.
1
Interlock pin safety feature
4
Interlock hook feature on the chassis cover
and base
2
Chassis cover
5
Chassis base
3
Top surface perimeter screws
6
Three screws at the front of the chassis
faceplate
279990
1
3
2
5
4
6
