manualshive.com logo in svg

Cisco ASR 1000 Series, Руководство по установке оборудования

Cisco ASR 1000 Series - мощное устройство для сетевой инфраструктуры. Получите дополнительное руководство по настройке программного обеспечения, скачав его бесплатно с manualshive.com. Важно изучить "Software Configuration Manual" для эффективной эксплуатации этого продукта.

Поделиться
Скачать
background image

 

1-2

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 1      Cisco ASR 1000 Series Routers Hardware Overview

Cisco ASR 1000 Series Routers

Cisco ASR 1000 Series Routers

The Cisco ASR 1000 Series Aggregation Services Routers are the next generation Cisco midrange router 
products. The Cisco ASR 1000 Series Aggregation Services Routers use an innovative and powerful 
hardware processor technology known as the Cisco QuantumFlow Processor. The following are the 
Cisco ASR 1000 Series Routers:

•

The Cisco ASR 1006 Router is a 12-SPA, 6-rack-unit (RU), hardware-redundant chassis with two 
Embedded Services Processor (ESP) slots, two Route Processor (RP) slots, and three SIP slots. 

•

The Cisco ASR 1004 Router is an 8-SPA, four rack-unit (RU) chassis with one ESP slot, one RP 
slot, and two SIP slots. 

•

The Cisco ASR 1002 Router is a 3-SPA, 2-RU chassis with one embedded services processor slot 
that comes with the route processor, Cisco ASR 1000 Series Shared Port Adapter Interface 
Processor (SIP), and 4 Gigabit Ethernet ports built in. For more information about the type of 
connectors and cables used by the 4-port Gigabit Ethernet built-in SPA, the 

Cisco ASR 1000 Series 

Aggregation Services Routers SIP and SPA Hardware Installation Guide

.

•

The Cisco ASR 1002-F Router is a one half-height SPA, 2-RU chassis. The embedded services 
processor, route processor, and SPA interface processor (SIP) are integrated with the chassis. In 
addition, 4 Gigabit Ethernet ports are built into the chassis.

•

The Cisco ASR 1013 Router is a 24 half-height shared port adapters, 13-RU chassis that can hold 6 
SIPs and provides superslots (more height and power) for the Cisco ASR1000-RP2s and Cisco 
ASR1000-ESPs. The Cisco ASR 1013 Router is designed with two zones (Zone 1 and Zone 0) for 
redundancy and superslot spacing. The Cisco ASR 1013 router has four 40G slots and two 100G 
slots.

•

The Cisco ASR 1001 Router is a one rack-unit chassis that offers a compact form factor router that 
satisfies customer demands such as low power consumption and decreased usage of rack space. The 
Cisco ASR 1001 Router has the route processor, embedded services processor, and SIP integrated 
within the chassis with one half-height SPA slot.

•

The Cisco ASR 1002-X Router is a 3-SPA, 2-RU chassis. The embedded services processor and 
route processor of this router are integrated in the chassis. There are six small form factor pluggable 
(SFP) Gigabit Ethernet ports. Depending on the Cisco software license that you install, the router 
can provide a forwarding bandwidth of 5 Gbps, 10 Gbps, 20 Gbps, or 36 Gbps.

For the single-route-processor Cisco ASR 1000 platforms (Cisco ASR 1002, Cisco ASR 1002-F, Cisco 
ASR 1002-X and Cisco ASR 1004), the route processor has a dual Cisco IOS Software option that allows 
these routers to use Cisco IOS software redundancy, Cisco high-availability features, and Nonstop 
Forwarding (NSF). Single-route-processor Cisco ASR 1000 platforms do not support ISSU upgrade or 
downgrade. Instead sub-package software upgrade is supported only if the router is running in 
sub-package mode.

Note

The Software Redundancy feature requires the router to have 8 GB of DRAM memory.

The Cisco ASR 1000 Series Routers run Cisco IOS XE Software and introduce a distributed software 
architecture that moves many operating system responsibilities out of the IOS process. In this 
architecture, Cisco IOS, which previously was responsible for almost all of the internal software 
processes, now runs as one of many Cisco IOS XE processes while allowing other Cisco IOS XE 
processes to share responsibility for running the router. 

Содержание ASR 1000 Series



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ASR 1000 Series

IBM 2210 Installation And Initial Configuration Manual preview
2210
Бренд: IBM Страницы: 72
Vanguard 340 Installation Manual preview
340
Бренд: Vanguard Страницы: 121
RAIDAGE DAGE312UTL-NAS User Manual preview
DAGE312UTL-NAS
Бренд: RAIDAGE Страницы: 60
Rajant Corporation BreadCrumb CX1 User Manual preview
BreadCrumb CX1
Бренд: Rajant Corporation Страницы: 40
Amit CDD531AM-U02 User Manual preview
CDD531AM-U02
Бренд: Amit Страницы: 75
RR-Concepts StationMaster Manual preview
StationMaster
Бренд: RR-Concepts Страницы: 12
Axis P1355-E User Manual preview
P1355-E
Бренд: Axis Страницы: 64
SHOWTEC LED Operator 4 Manual preview
LED Operator 4
Бренд: SHOWTEC Страницы: 15
Atlantis Land A02-PCI-W54M Specification preview
A02-PCI-W54M
Бренд: Atlantis Land Страницы: 2
Commax CVN-0430F User Manual preview
CVN-0430F
Бренд: Commax Страницы: 122
JETWAY FDF13 Series Quick Installation Manual preview
FDF13 Series
Бренд: JETWAY Страницы: 15
Opengear IM4208 Quick Start Manual preview
IM4208
Бренд: Opengear Страницы: 4
Billion myguard 6700G Specifications preview
myguard 6700G
Бренд: Billion Страницы: 2
IntraServer Technology ITI-2135 Installation Manual preview
ITI-2135
Бренд: IntraServer Technology Страницы: 16
Tripp Lite N302-006 Specification Sheet preview
N302-006
Бренд: Tripp Lite Страницы: 2
Tripp Lite N304-06M Specification Sheet preview
N304-06M
Бренд: Tripp Lite Страницы: 2
D-Link DAP-3711 User Manual preview
DAP-3711
Бренд: D-Link Страницы: 54
D-Link DCS-2210 User Manual preview
DCS-2210
Бренд: D-Link Страницы: 67

Бренды по названию

Популярные бренды

Загрузить еще бренды