14-8
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing Cisco ASR 1000 Series Route Processor Internal Hard Drive
Replacing the Cisco ASR1000-RP1 Internal Hard Drive
To replace the Cisco ASR1000-RP1 internal hard drive and insert the Cisco ASR 1000 Series Route
Processor 1 into the Cisco ASR 1000 Series Router, follow these steps:
Step 1
On the Cisco ASR1000-RP1, carefully align the new hard drive unit with its screw fastener to the base
screw on the bottom of the module.
Step 2
Reconnect the two cables to the rear of the hard drive. These are keyed for easy connection.
Figure 14-5
shows the Cisco ASR1000-RP1 module internal hard drive and module base.
Figure 14-5
Cisco ASR1000-RP1 Module Internal Hard Drive and Module Base
Step 3
Align hard drive module to carrier base tabs, align the module fastener to base screw mate by hand, and
then tighten with screw driver.
1
Hard drive module fastener
2
Carrier mating fastener
1
2
280154