1-82
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
network-clock set lockout
network-clock set lockout
To lock out a clock source, use the
network-clock set lockout
command. Use the
network-clock clear
lockout
form of the command to remove the lockout.
network-clock set lockout {interface
interface_name slot/port
| external
slot/card/port
}
network-clock clear lockout
Syntax Description
Command Modes
Global configuration
Command History
Usage Guidelines
The
network-clock set lockout
command locks out a clock source. A clock source flagged as lock-out
is not selected for SyncE.
To clear the lock-out on a source, use
network-clock clear lockout {interface
interface_name
slot/port
| external
slot/card/port
}
command.
Note
Lockout takes precedence over force switch and force switch overrides the manual switch.
Examples
This example shows how to lockout the clock source.
Router(config)#
network-clock set lockout interface GigabitEthernet 0/1
interface_name
Specifies the interface name.
external
specifies the external interface name.
Release
Modification
15.1(2)SNG
Support for this command was introduced on the Cisco ASR 901 router.
