1-70
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
network-clock eec
network-clock eec
To configure the clocking system hardware with the desired parameters, use the
network-clock eec
command. Use the
no
form of the command to disable the clocking system hardware.
network-clock eec {
1
|
2
}
no network-clock eec {
1
|
2
}
Syntax Description
Command Modes
Global configuration
Command History
Usage Guidelines
The
network-clock eec
command configures the clocking system hardware with the desired parameters.
Examples
The following example configures the clocking system hardware with EEC option 1:
Router(config)#
network-clock eec 1
Related Commands
1
For option 1, the default value is EEC-Option 1 (2048).
2
For option 2, the default value is EEC-Option 2 (1544).
Release
Modification
15.1(2)SNG
This command was introduced.
Command
Description
network-clock
synchronization ssm
option
Configures the router to work in a synchronized network mode as described
in G.781
