1-131
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
set ip precedence (route-map)
set ip precedence (route-map)
To set the precedence value (and an optional IP number or IP name) in the IP header, use the
set ip
precedence
command in route-map configuration mode. To leave the precedence value unchanged, use
the
no
form of this command.
set ip precedence
[
number
|
name
]
no set ip precedence
Syntax Description
Command Default
Disabled
Command Modes
Route-map configuration
Command History
Usage Guidelines
Table 1-4
lists the values for the
number
argument and the corresponding
name
argument for precedence
values in the IP header. They are listed from least to most important.
You can set the precedence using either a number or the corresponding name. Once the IP Precedence
bits are set, other QoS services such as weighted fair queueing (WFQ) and Weighted Random Early
Detection (WRED) then operate on the bit settings.
number
|
name
(Optional) A number or name that sets the precedence bits in the IP header.
The values for the
number
argument and the corresponding
name
argument
are listed in
Table 1-4
from least to most important.
Release
Modification
15.1(2)SNG
Support for this command was introduced on the Cisco ASR 901 router.
Table 1-4
Number and Name Values for IP Precedence
Number
Name
0
routine
1
priority
2
immediate
3
flash
4
flash-override
5
critical
6
internet
7
network
