Christie Roadie 25K, Руководство пользователя

Страница: 91 / 191

OPERATION
Roadie 25K User’s Manual
3-35
band represents the last band of the grayscale pattern, which should be 100%
white (or the current color, if a certain color is enabled). Do not adjust too far.
5)
It may be advantageous to go back and check the black band—adjust the
blacklevel slidebar if necessary. NOTE: Readjusting blacklevels at this point
affects the gain; only re-adjust if absolutely necessary. Adjust until both bands
are just optimized.
6)
Repeat Steps 2-5 with the other two remaining primary colors. When each
primary color shows one optimized black band and white (or colored) band, the
input levels for this source are correctly set. Upon exiting the Input Levels menu,
the Peak Detector checkbox will clear.
Figure 3.17. Adjusting Input Levels Using the Peak Detector
(RED EXAMPLE SHOWN)
Advanced Image Settings
— SUBMENU
Use the Advanced Image Settings
submenu to adjust lesser used options
used for more specialized
applications.
GAMMA TABLE:
This control applies a default video or graphics gamma table or
“curve” to your images, controlling the intensity of midlevel colors while
maintaining maximum contrast, brightness
and color performance. As shown at right,
the graphics curve is a simple power curve
while the video curve has a linear segment
near black to compensate for increased
blacklevels typical of video signals.
Although the projector automatically
applies either the graphic or video curve
according to what type of incoming signal is detected, in some cases you may wish to
override this default and use graphics gamma for a video source or video gamma for
a graphics source. Alternatively, if neither default is ideal, you may prefer to apply a
user-defined custom gamma curve that has been created externally, named, and