Christie Roadie 25K, Руководство пользователя

Страница: 148 / 191

SPECIFICATIONS
6-2
Roadie 25K User’s Manual
Total number of available inputs 6
(5 supplied as standard)
Analog: RGB / YPbPr
(5 BNCs at INPUT 1)
Scan format Interlaced or Progressive
Signal types / color spaces
•
RGB
•
YPbPr
Horizontal frequency range 15 – 120 kHz
Vertical frequency range ✽ 23.97 – 150 Hz
Pixel clock rate 13 – 220 MHz min.
Active pixels per scan line (H) 640 – 2048
Active lines per field/ frame (V) 200 – 1536
A/D conversion resolution 10-bit
Input levels
R,B,G,Y — with sync
R,G,B — without sync
Pb,Pr
1.0V
p-p
±2 dB (0.79V
p-p
– 1.26V
p-p
)
0.7V
p-p
±2 dB (0.56V
p-p
– 0.88V
p-p
)
0.7V
p-p
±2 dB (0.56V
p-p
– 0.88V
p-p
)
DC offset ± 5V
Nominal impedance 75
S
Max. return loss (VSWR) 1.2:1 dB @ 200 MHz
✽
Specifies frame rate for non-interlaced sources and field rate for interlaced sources. Input frequencies higher
than the maximum panel refresh rate are displayed at a lower rate.
Analog: Video
(INPUTS 3 and 4)
Signal formats Composite (CVBS), S-Video (Y/C)
Connectors
•
Composite Video
(INPUT 3)
• S-Video
(INPUT 4)
Female RCA
4-pin miniature DIN
Video standards NTSC, NTSC 4.43, PAL, PAL-M,
PAL-N, PAL-60 & SECAM
A/D conversion resolution 8-bit
Input levels
Composite
S-Video, Luma (Y)
S-Video, Chroma (C)
1.0 V
p-p
± 3dB
(including sync tip)
1.0 V
p-p
± 3dB
(including sync tip)
630 mV
p-p
nominal (burst)
DC offset ± 2V
Nominal impedance 75
S
Maximum return loss (VSWR) 1.2:1 dB @ 6 MHz
Analog: Sync
(INTERLACED OR PROGRESSIVE SCAN FORMAT
)
Input levels
(for composite or separate H & V)
0.5V
p-p
– 4.0V
p-p
Impedance
(for composite or separate H & V)
75
S
Sync type
(for composite or separate H & V)
•
Separate H and V
•
Bi-level or tri-level sync-on-green
•
Bi-level or tri-level composite
•
Serrations and/or Equalization pulses
•
MacroVision

for stnd. & prog. video
Polarity
(for composite or separate H & V)
Positive or negative
Maximum return loss (VSWR) 1.2:1 dB @ 200 MHz
Inputs
'