Chopin Mixolab 2, Руководство по обслуживанию

Страница: 22 / 134

22
Maintenance manual
09/2016
Mixolab 2
Chapter 2 Trouble-shooting
ERR 51 "Motor blocked, or speed measuring
problem!"
Measured speed = 0 rpm
Switch off then switch on the instrument.
1 . If the mixing blades are not rotating:
■
Run a test without the bowl: If the
message disappears, inspect the bowl
(clogging up, distorted mixing blades, state
of the mixing blades' two brackets) -> clean
or replace as needed.
■
Remove cover and rotate manually the
transmission shaft by the motor's meter disc;
if it is jammed or rotates with difficulty:
- readjust alignment of the transmission
between the motor and the bowl unit,
- If the problem persists, isolate one by one
any faulty part (coupling, distribution block,
motor, etc.) and replace it.
- check the electrical connections of the
motor and the self-induction coil.
2 . If the mixing blades rotate:
■
Readjust the induction sensor.
■
if the problem persists, replace the
induction sensor.
op. 6
op. 6-3
op. 6-3
ERR no. Display/Description Action
See
Chap.3 §