Chopin Mixolab 2, Руководство по обслуживанию

Страница: 102 / 134

102
Maintenance manual
09/2016
Mixolab 2
Chapter 3 Repairs
9. Repeat steps 6 to 8 twice. Take the average of the 3 resulting
values and fill in the table.
10. Repeat steps 6 to 8 three times with 30 ml of water. Record
and take the average of the resulting values and fill in the
table.
11. Using the values in the table, fill in the fields opposite.
Example:
12. Enter the average value in the calibration window
13. Click [Apply] to confirm.
14. Repeat steps 5 to 8 three times with 25 ml of water. Record
and take the average of these three values and fill in the table.
15. Press the injection arrow. The pump injects water into the con-
tainer (Ad).
16. When the pump empties, place the container on the scales
and weigh the quantity of water. Record the measurement.
Repeat this twice and take the average.
Example:
If the values are within the range 24.875 ml and 25.125 ml, the cali-
bration is correct.
Otherwise, repeat pump calibration.
12: Adjusting and control operations for the Mixolab
Operation 12-8 Calibrating the Mixolab's pump
Page: 2 / 2
Consumables:
Tools:
-
-
Adjustment Check at 25 ml
10 ml
4 decimal places
30 ml
4 decimal places
l between 24.875
and 25.125
no. 1 9.9681 29.9023
no. 2 9.9265 29.9156
no. 3 9.9207 29.9001
Aver-
age
9.9384
29.906 ml
Adjustment Check at 25 ml
10 ml
4 decimal places
30 ml
4 decimal places
l between 24.875
and 25.125
no. 1 9.9681 29.9023 24.98
no. 2 9.9265 29.9156 24.97
no. 3 9.9207 29.9001 24.99
Average 75.4094 29.906 ml 24.98