Chint Power CPS SCA20KTL-DO, Инструкция по установке и эксплуатации

Страница: 35 / 110

31
Figure 3-22 Polarity check
(d) Put the positive (negative) DC cable through the gland and cable
fastener, and then crimp the cable with the cord end terminals shown
in Table 3-6.
Table 3-6 Cord end terminals for DC cables
No. Item Function
1 For Positive DC cable
2 For Negative DC cable
(e) Insert the crimped positive and negative terminals into the male and
female housing respectively, and then tighten the seal glands, as
shown in Figure 3-23 and Figure 3-24:
NOTICE:
It is required to use the attached or the same type of DC input
connectors. Otherwise, poor contact may happen, causing problem
of normal use.