Check Point QUANTUM MAESTRO, Руководство пользователя

Страница: 38 / 188

LEDs
Quantum Maestro Getting Started Guide | 38
Power Supply Unit LED Behavior - Front Panel
LED Behavior Instructions Action Required
Steady green All units are connected and running
normally. None.
Steady red or
amber A PSU is faulty or disconnected. Make sure the AC cable is plugged in to
the PSU.
Make sure there is the AC power.
If the problem persists, replace the faulty
PSU.
Off N / A None.
Power Supply Unit LED Behavior - Rear Panel
LED
Behavior
Instructions Action Required
Steady green The PSU is connected and running normally. None.
Flashing
green at 1Hz AC is present, only 12VSB on (PSU off), or PSU in
Smart-On state. Contact Check Point
Support .
Steady read
or amber AC cord is unplugged, or AC power is lost, while the
second PSU still has AC input power. Plug in the AC cord to
the faulty PSU.
Make sure there is the
AC power.
PSU failure - voltage, current, temperature, or fan. Check the voltage of
your AC power.
If voltage is OK, contact
Check Point Support .
Flashing read
or amber at
1Hz PSU warning events, where the PSU continues to
operate; high temperature, high power, high current,
slow fan. Contact Check Point
Support .
Off No input AC power at all PSUs. Make sure there is the
AC power.
Plug in the AC cords.
If the AC power is OK,
contact
Check Point
Support .