Check Point QUANTUM MAESTRO, Руководство пользователя

Страница: 26 / 188

MHO-170 Front Panel
Quantum Maestro Getting Started Guide | 26
MHO-170 Front Panel
Important - This section describes the default configuration. It is possible to change the
port type (Management, Uplink, and Downlink) in the Gaia Operating System on the
Quantum Maestro Orchestrator. See the
Maestro Administration Guide for your
version > Chapter Configuring Security Groups > Section Configuration Procedure >
Section Configuring Security Groups in Gaia Clish > Section Configuring the Port
Settings .
Item Description
1 LEDs. See "LEDs" on page 31 .
2 Ports 1 and 2 (colored green), through which you manage the Security Groups.
To these ports you connect:
n
Check Point Management Servers.
n
Clients, from which you configure the Gaia Operating System (Gaia Portal and Gaia
Clish) on the Security Appliances connected to the Downlink ports (
4 ).
Important - It is possible to use only these ports.
3 40 Gbps / 100 Gbps Uplink ports 3 to 16 (colored blue).
To these ports you connect your external traffic and internal traffic networks.
You use DAC or Fiber cables (with transceivers).
4 Downlink ports 17 to 31 (colored orange).
To these ports you connect your Check Point Security Appliances.
You use DAC or Fiber cables (with transceivers).
5 RJ45 port with the label MGMT . See "MGMT Ports" on page 45 .
To this port you connect a client, from which you configure the Gaia Operating System on the
Quantum Maestro Orchestrator (in Gaia Portal, or Gaia Clish).
6 USB 2.0 port. See "USB Port" on page 47 .
7 Reset button with the label RST . See
"Reset Button" on page 49
.