Check Point QUANTUM MAESTRO Скачать руководство пользователя страница 13

Страница: 13 / 188

Safety Warnings

Quantum Maestro Getting Started Guide | 13

Safety Warnings

Installation Instructions

Read all installation instructions before you connect the equipment to the power source.

Bodily Injury Due to Weight

Use enough people to lift this product safely:

Weight

Recommended Number of People

<18 kg (<40 lbs)

1 person

18 - 32 kg (40 - 70 lbs)

2 people

32 - 55 kg (70 - 121 lbs)

3 people

>55 kg (>121 lbs)

Use a mechanical lift

Risk of Electric Shock!

With the fan unit removed, power pins are accessible within the module cavity.

Do not insert tools or body parts into the fan unit cavity.

Over-temperature

Do not operate this equipment in an area with an ambient temperature that exceeds the recommended
maximum: 45°C (113°F).

To guarantee proper cooling, allow at least 8 cm (3 inches) of clearance around the ventilation openings.

Stacking the Chassis

Do not stack the Chassis on any other equipment. If the Chassis falls, it can cause bodily injury and
equipment damage.

Redundant Power Supply Connection - Electrical Hazard

This product includes a redundant power supply or a blank cover in its place.

In case of an empty power supply bay, do not operate this equipment with the blank cover removed, or
not properly fastened.

Double Pole/Neutral Fusing

This Quantum Maestro Orchestrator has double pole/neutral fusing.

Remove all power cords before you open the cover of this product or touch any internal parts.

Содержание QUANTUM MAESTRO





























































































































































































Результаты поиска

Содержание QUANTUM MAESTRO

Отзывы:

Похожие инструкции для QUANTUM MAESTRO

Бренды по названию

Популярные бренды

Check Point QUANTUM MAESTRO, Руководство пользователя

Результаты поиска

Содержание QUANTUM MAESTRO

Отзывы:

Похожие инструкции для QUANTUM MAESTRO

Бренды по названию

Популярные бренды