Check Point QUANTUM MAESTRO, Руководство пользователя

Страница: 24 / 188

Hardware Components
Quantum Maestro Getting Started Guide | 24
Item Description
7
RJ45 port with the label . See
"MGMT Ports" on page 45
.
To this port you connect a client, from which you configure the Gaia Operating System on the
Quantum Maestro Orchestrator (in Gaia Portal, or Gaia Clish).
8 RJ45 port with the label . See "Console Port" on page 48 .
To this port you connect a client, from which you configure the Gaia Operating System on the
Quantum Maestro Orchestrator (in Gaia Clish).
9 Synchronization port 32 (colored purple).
You connect a DAC cable between ports 32 on two Quantum Maestro Orchestrators MHO-175
for redundancy on the same site.
10 Button to select indication states for the splitting control LEDs. See
"MHO-175 Splitting
Options" on page 83
.
11 Splitting control LEDs that show the indication state for Port LEDs:
n
State of which port to show (without a split cable).
n State of which split port to show (in 1-to-2 split, or 1-to-4 split).
See "MHO-175 Splitting Options" on page 83 .
12 Port LEDs that show the status of all ports (including the split ports).
13 Need to add such callout
Reset button with the label
RST . See
"Reset Button" on page 49
.
Notes:
n It is possible to connect DAC or Fiber cable (with transceivers) to each port (from
1 to 32).
n
It is possible to connect Breakout cables to each port. See "MHO-175 Splitting
Options" on page 83 .