Mounting the Quantum Maestro Orchestrator MHO-140 and MHO-170 in a Rack
Quantum Maestro Getting Started Guide | 76
Step 4: Sliding the Blades in the Rails
While your installation partner is supporting the Quantum Maestro Orchestrator, perform these steps:
Step
Instructions
1
Slide each rack mount blade (
B
) into the corresponding rack mount rail (
A
).
Note - Make sure the mount blade ears (
F
) face the rack's posts correctly.
2
Slide the rack mount blades (
B
) inside the rack mount rails (
A
) to fit your rack's depth.
3
Attach the mount blade ears (
F
) to the rack's posts.
4
Use the four Phillips pan head screws (
C
) to secure each mount blade ear (
F
) to each side
of the rack.
5
Do not tighten the screws yet.
Example:
Step 5: Tightening the Screws
While your installation partner is supporting the Quantum Maestro Orchestrator, tighten the eight Phillips
pan-head screws (
C
) you inserted in the previous steps.
To tighten the screws, use a torque of 4.5±0.5 Nm.
Содержание QUANTUM MAESTRO
Страница 1: ... Classification Protected 11 November 2021 QUANTUM MAESTRO Getting Started Guide ...
Страница 88: ...Connecting Two Quantum Maestro Orchestrators for Redundancy Quantum Maestro Getting Started Guide 88 Example ...
Страница 159: ...Dual Site with four Switches Quantum Maestro Getting Started Guide 159 Diagram ...
