Ceyear 1465 Series, Руководство по программированию

Страница: 86 / 143

3 SCPI
3.3 Instrument subsystem command
79
Parameter:
<Pert> Amplitude percentage of frequency 2 when PM Waveform is set to DualSinc.
Range: 50[0
，
100].
Example: :PM:INTernal:FREQuency:ALTernate:AMPLitude:PERCent Set the percentage of
second waveform of dual sine to the total signal output power to 20%..
Reset status: 50
Key Entry:
【 FM/ΦM 】 —>[Dual Sinc]—> [Freq 2 Ampl Percent]
[:SOURce]:PM:INTernal:NOISe <Mode>
Function: This command is used for setting signal output types when PM Waveform is set to White
noise, which includes: White noise and Gauss. For PM waveform, see the command
―
:AM:INTernal:SHAPe
‖.
Setting format: [:SOURce]:PM:INTernal:NOISe UNIForm|GAUSsian
Query format: [:SOURce]:PM:INTernal:NOISe?
Parameter:
<Mode> Discrete data. Options for signal output type when FM Waveform is set to White noise:
UNIForm White noise,
GAUSsian Gauss.
Example: :PM:INTernal:NOISe GAUS PM noise is set to Gauss.
Reset status: UNIF
Key Entry:
【 FM/ΦM 】 —>[Basic Config]—>[PM Waveform]
[:SOURce]:PM:INTernal:RAMP <Mode>
Function: This command is used for setting signal output types when PM Waveform is set to
Zigzag, which includes: Zigzag-up and Zigzag-down. For PM waveform, see the
command ―
:AM:INTernal:SHAPe
‖.
Setting format: [:SOURce]:PM:INTernal:RAMP POSitive|NEGative
Query format: [:SOURce]:PM:INTernal:RAMP?
Parameter:
<Mode> Discrete data. Options for signal output type when PM Waveform is set to Zigzag:
POSitive Zigzag-up,
NEGative Zigzag-down.
Example: :PM:INTernal:RAMP NEG PM Zigzag is set to Zigzag-up.
Reset status: POS
Key Entry:
【 FM/ΦM 】 —>[Basic Config]—>[PM Waveform]
[:SOURce]:PM:INTernal:SHAPe <Mode>
Function: This command is used for setting PM signal output waveform, which includes: Sinc,
Square, Triangle, Zigzag, White noise, SweepSinc, and DualSinc.
Setting format: [:SOURce]:PM:INTernal:SHAPe SINE|SQUare|TRIangle|RAMP
NOISe|SWEPtsine|DUALsine
Query format: [:SOURce]:PM:INTernal:SHAPe?