Ceyear 1465 Series Скачать руководство пользователя страница 8

Страница: 8 / 143

1 About This Manual

1.1 About This Manual

1 About This Manual

This chapter introduces the function, compositions and main content of the Programming Manual of the

1465 series signal generator as well as other related documents provided to the user.



About this manual .................................................................................................. 1



Related Documents................................................................................................. 1

1.1 About This Manual

This manual introduces the remote control and the SCPI operation method of the 1465 series signal

generator, as well as the programming examples and the basic concept of the I/O function library to

facilitate the user to quickly master the programming method. To facilitate your familiarity with the

instrument, please read this manual carefully before operating the instrument, and then follow the

instructions of manual.

SCPI (Standard Commands for Programmable Instruments) defines standards and methods for remote

control of the instruments, and it is also the programming language for programmable instruments for

electronic test and measurement. The SCPI is based on the specifications and types in IEEE-488.2. For

details, please visit http://www.scpiconsortium.org. This manual describes in detail the SCPIs of the

1465 series signal generator.

The chapters of the Programming Manual include:



Remote Control

This chapter introduces the remote control methods of the instrument so that the user can rapidly

master the method to control the instrument in a remote way. It is further divided into the following

three sections: remote control basis, which introduces the concepts related to remote control,

software configuration, remote interface, SCPI, etc.; instrument interface configuration method,

which introduces the connection method and software configuration method of the remote interface

of the 1465 series signal generator; the I/O function library, which introduces the basic concept of

the instrument driver and the basic installation and configuration of the IVI-COM/IVI-C driver.



SCPI

The common command, instrument-specific command and compatibility command are introduced

by category, and functions, parameters, and examples of the SCPI are described one by one.



Programming Examples

The basic programming examples and advanced programming examples are given and described

in the form of explanatory note and example code, so as to facilitate the user to quickly master the

programming method of the signal generator.



Error Description

This chapter includes error information description and repair methods.



Appendixes

This chapter provides the necessary remote control reference information of the 1465 series signal

generator, including the SCPI lookup table and error information.

1.2 Related Documents

The product documents related to 1465 series signal generator include:

Содержание 1465 Series
















































































































































Результаты поиска

Содержание 1465 Series

Отзывы:

Бренды по названию

Популярные бренды

Ceyear 1465 Series, Руководство по программированию

Результаты поиска

Содержание 1465 Series

Отзывы:

Бренды по названию

Популярные бренды