Ceyear 1465 Series, Руководство по программированию

Страница: 106 / 143

3 SCPI
3.3 Instrument subsystem command
99
<RowIndex> Row index of the multitone modulation list.
Range: 0[0
，
63].
<Pow> Atten Ampl
Range: 0dB[-100dB
，
0dB].
<Phase> Initial Phase.
Range: 0deg[0deg
，
359deg].
<State> Status. Boolean data is as follows:
1
：
ON,
0
：
off.
Example:
:RADio:MTONe:ARB:SETup:TABLe:ROW ―2 ，
-10
，
40
， 0‖ This example indicates that, in
the second row of the list, Atten Ampl is set to -10dB, Phase set to 40deg and Status
set to OFF.
:RADio:MTONe:ARB:SETup:TABLe:ROW? 2 indicates query of index 2, namely the information in
the third row, including Freq Offset, Atten Ampl, Phase and Status.
Reset status: 0
，
0dB
，
0deg
，
0
Key Entry: None
[:SOURce]:RADio:MTONe:ARB[:STATe] <State>
Function: This command sets Multi Tone ON/OFF state of the signal generator. When Multi Tone is
turned on, the main information display area in user interface of the signal generator
will display the indication of IQ Modulate and Multi Tone.
Setting format: [:SOURce]:RADio:MTONe:ARB:STATe ON|OFF|1|0
Query format: [:SOURce]:RADio:MTONe:ARB:STATe?
Parameter:
<State> Boolean data. Multi Tone ON/OFF state is as follows:
ON | 1: Multi Tone is turned on,
OFF | 0: Multi Tone is turned off.
Example: [:SOURce]:RADio:MTONe:ARB:STATe 1 Multitone modulation function is enabled.
Reset status: 0
Key Entry:
【
Dual/Multi Tone
】 —>[Multi Tone]—>[Base Config]—>[Multi Tone ON OFF]
[:SOURce]:RADio:TTONe:ARB:ALIGnment <Mode>
Function: This command sets Dual Tone Alignment, including: Left, Centre and Right, which takes
effect only after Dual Tone is turned on. For enabling or disabling dual tone modulation
function, see the command ―:RADio:TTONe:ARB:STATe‖.
Setting format: [:SOURce]:RADio:TTONe:ARB:ALIGnment LEFT|CENTer|RIGHt
Query format: [:SOURce]:RADio:TTONe:ARB:ALIGnment?
Parameter:
<Mode> Discrete data. Dual Tone Alignment is as follows:
LEFT | 0: Left,
CENTer | 1: Center,
RIGHt | 2: Right.