Ceyear 1465 Series, Руководство по программированию

Страница: 72 / 143

3 SCPI
3.3 Instrument subsystem command
65
[:SOURce]:PULM:INTernal:SLIDing:POINts <Num>
Function: When the pulse source is set to Sliding, this command is used for setting pulse sliding
points.
Setting format: [:SOURce]:PULM:INTernal:SLIDing:POINts <Num>
Query format: [:SOURce]:PULM:INTernal:SLIDing:POINts?
Parameter:
<StepTime> Sliding points.
Range: [2
，
1024].
Example: [:SOURce]:PULM:INTernal:SLIDing:POINts 10 Set sliding points to 10.
Reset: 1024
Key Entry:
【
PULSE
】 —>[Sliding]—>[Sliding Counts]
[:SOURce]:PULM:INTernal:STAGger:INSert <Index>,<PlsPerd>
Function: This command is used for inserting pulse staggered point. The user should input index
and pulse period successively. The multiple of at most five is supported for the
staggered pulse of the signal generator. Therefore, the user may query the current
staggered points before using this command. When the maximum number of
staggered points is exceeded, current set staggered point will not be inserted to this
staggered list. In addition, pulse width in the list will be a unified value. For related
commands, see ―
PULM:INTernal:STAGger:POINts
‖,―
:PULM:INTernal:PWIDth
‖.
Setting format: [:SOURce]:PULM:INTernal:STAGger:INSert <index>,<pls_period>
Parameter:
<Index> Index of PRF staggered list points.
Range: 0[0
，
4].
< PlsPerd> Pulse period.
Range: 1.000000ms[40ns
，
42.000000000s].
Example: [:SOURce]:PULM:INTernal:STAGger:INSert 1
，
1ms
Insert a staggered point with 1ms period in index 1 of the current PRF staggered list.
Key Entry:
【
PULSE
】 —>[Staggered]—>[EditStagg List…] —>[Insert]
Note: for setting only.
[:SOURce]:PULM:INTernal:STAGger:POINts?
Function: This command is used for querying current PRF staggered points. "Zero" indicates that
there is no staggered point in the current list, and "Nonzero" indicates the actual points
in the current list. It should be noted that, if the user operates the interface manually,
the index in the Stagg List will start from 0; that is, if the queried number of points in
the list is 1, the index actually shown in the list is 0.
Query format: [:SOURce]:PULM:INTernal:STAGger:POINts?
Return value:
<Num> Integer data; returned points of Stagg List.
Range: 0[0
，
5].
Example: [:SOURce]:PULM:INTernal:STAGger:POINts?