Ceyear 1465 Series, Руководство по программированию

Страница: 10 / 143

2 Remote Control
2.1 Remote control basis
3
2 Remote Control
This chapter introduces the remote control basis as well as the remote interface and its configuration
method of the 1465 series signal generator, and also briefly describes the concept and classification of
the I/O driver library so that the user can have a preliminary knowledge about the remote control of this
instrument. The specific content includes:

Remote control basis ............................................................................................ 3

Remote interface and its configuration ............................................................... 27

I/O Function Library ............................................................................................. 29
2.1 Remote control basis

Remote Interface ................................................................................................... 3

Message ................................................................................................................ 6

SCPI ...................................................................................................................... 7

Command Sequence and Synchronization ........................................................ 15

Status Reporting System .................................................................................... 17

Programming Considerations .............................................................................. 26
2.1.1 Remote Interface
The instrument with remote control function generally supports four kinds of remote control interfaces, i.e.
LAN and GPIB, and the type of port supported by the instrument is determined by the function of the
instrument.
The description of the remote interface and associated VISA addressing string is as shown in the
following table:
Table 2.1 Types and VISA Addressing Strings of Remote Control Interfaces
Remote Interface VISA Addressing String Description
LAN
(Local Area Network)
VXI-11 protocol:
TCPIP::host_address[::LAN_device_name][::INSTR]
Raw socket protocol:
TCPIP::host_address::port::SOCKET
Controller realizes
remote control by
connecting the
instrument via the
network port on the
rear panel of the
instrument.
For the specific
protocol, please
refer to:
2.1.1.1 LAN
interface
GPIB
(IEC/IEEE Bus Interface)
GPIB::primary address[::INSTR] 4 Controller realizes
remote control by
connecting the
instrument via the