Ceyear 1465 Series, Руководство по программированию

Страница: 107 / 143

3 SCPI
3.3 Instrument subsystem command
100
Example: [:SOURce]:RADio:TTONe:ARB:ALIGnment RIGHt
Display Dual Tone Alignment to be displayed to the right of carrier.
Reset status: CENT
Key Entry:
【
Dual/Multi Tone
】 —>[Dual Tone]—>[Alignment>>]
[:SOURce]:RADio:TTONe:ARB:FSPacing <FreqSpacing>
Function: This command is used for setting Freq Separation of dual tone. This command is valid
only when Dual Tone is set as ON. For enabling or disabling the dual tone modulation
function, see the command ―
:RADio:TTONe:ARB:STATe
‖.
Setting format: [:SOURce]:RADio:TTONe:ARB:FSPacing <val><freq unit>
Query format: [:SOURce]:RADio:TTONe:ARB:FSPacing?
Parameter:
<FreqSpacing>Frequency spacing of dual tone.
Range: 10MHz[0Hz
，
40MHz].
Example: [:SOURce]:RADio:TTONe:ARB:FSPacing 30MHz
Set the frequency spacing of dual tone to 30MHz.
Reset status: 10MHz
Key Entry:
【
Dual/Multi Tone
】 —>[Dual Tone]—>[Freq Separation]
[:SOURce]:RADio:TTONe:ARB[:STATe] <State>
Function: This command is used for enabling the dual tone modulation function of the signal
generator. When this function is enabled, the main information display area of the
signal generator will display IQ modulation and dual tone indication.
Setting format: [:SOURce]:RADio:TTONe:ARB:STATe ON|OFF|1|0
Query format: [:SOURce]:RADio:TTONe:ARB:STATe?
Parameter:
<State> Boolean data. Options for state of dual tone modulation are:
ON | 1: Dual Tone ON,
OFF | 0: Dual Tone OFF.
Example: [:SOURce]:RADio:MTONe:ARB:STATe 1 Multi Tone is ON.
Reset status: 0
Key Entry:
【
Dual/Multi Tone
】 —>[Dual Tone]—>[Dual Tone ON OFF]
[:SOURce]:RADio:ARB:MODE <Mode>
Function: This command is used for setting arbitrary waveform modes, which include Arb and Seq.
At Arb mode, the user can load and play any arbitrary waveform data file in the
user-defined format; at Seq mode, the user can generate waveform segment files as
required and combine waveform segments for sequence play. See the command
―
:RADio:ARB:SEQuence
‖.
Setting format: [:SOURce]:RADio:ARB:MODE ARB|SEQuence
Query format: [:SOURce]:RADio:ARB:MODE?
Parameter: