Ceyear 1465 Series, Руководство по программированию

Страница: 109 / 143

3 SCPI
3.3 Instrument subsystem command
102
Parameter:
<FileName> String type.
The folder where waveform segment file is stored, the folder specified by users can only be
that under relative path.
<WaveForm> String type.
Name of waveform segment file, the maximum number of waveform segment file
supported by this command is 64.
<Reps> Integer. Times of looped playback of each waveform segment.
Range: 1[1
，
65535].
<Marks> Discrete data type, mark switch of each waveform segment file, specific option is in
command format.
Example: [:SOURce]:RADio:ARB:SEQuence Seq1
，
waveform1
，
12
，
NONE
，
vaveform2
，
300
，
M1M2
Load a waveform sequence, which is located in Seq1 folder which contains
waveform1 and waveform2. The former is played 12 times with no mark output; the
latter is played 300 times, with mark 1 and mark 2 of each symbol output.
Key Entry:
【
Arb
】 —>[Base Config] —>[Add Wave Seg]
Note: for setting only.
[:SOURce]:RADio:ARB:SEQuence:CLOCk <Mode>
Function: This command sets Clock Type when the signal generator is in Arb mode. Arb mode
allows users to use CUSTom mode only. Other modes cannot be set; Seq mode
enables users to select CURRent, HIGH or CUSTom. For setting operation mode of
arbitrary waveform, see the command ―
:RADio:ARB:MODE
‖.
Setting format: [:SOURce]:RADio:ARB:SEQuence:CLOCk CURRent|HIGH|CUSTom
Query format: [:SOURce]:RADio:ARB:SEQuence:CLOCk?
Parameter:
<Mode> Discrete data. Clock Type in Arb mode is as follows:
CURRent | 0: Play waveform segment files in Seq mode at sampling rate
of each waveform segment;
HIGH | 1: Play waveform segment files in Seq mode at maximum
sampling rate of waveform segments each waveform segment;
CUSTom | 2: Play waveform segment files in Seq mode at the current
clock frequency setting of the signal generator.
Example: [:SOURce]:RADio:ARB:SEQuence:CLOCk HIGH
Set Clock Type to Highest.
Reset status: CURR
Key Entry:
【
Arb
】 —>[Base Config] —>[Clock Type]
[:SOURce]:RADio:ARB:SCLock:RATE <ClockRate>
Function: This command is used for setting the signal sampling rate of arbitrary waveform. The set