Carbide 3D Shapeoko 4 XXL, Инструкция по сборке

Страница: 10 / 43

S T E P 3
S T E P 3 – G a n t r y
16 docs.carbide3d.com support@carbide3d.com 17
Figure 3-4
3.4 Install X‑Axis Gantry
1. Position the X-Axis gantry in front of the
baseframe.
a. V-rail, Y-Axis proximity switch, and four
standoffs to the FRONT.
NOTE: You may need to have another person help
you lift and lay the gantry in position.
Figure 3-5
Figure 3-6
2. Pick the gantry up and rest the X-rail on its
back across the Y-rails. See Fig. 3-4 .
a. Top of X-rail pointing to the back of the
machine.
b. Top/back V-wheels resting on the left and
right V-rails.
c. Bottom two V-wheels on each side
overhanging the front of the left and right
rails.
3. Rotate the top of the gantry up and back
toward you 90°, so that the bottom V-wheels
on each side align with the lower V-rails. See
Fig. 3-5 .
4. Slide the gantry into place on the Y-Left and
Y-Right rails. See Fig. 3-6 .