Canon imagePROGRAF iPF6300S, Руководство пользователя

Страница: 1039 / 1126

3.
Press the OK button.
Roll paper cannot be inserted into the paper feed slot
Cause Corrective Action
The roll paper is warped. Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot. Remove the jammed paper.
(See " Clearing Jammed Roll Paper .")
→P.1014
(See " Clearing a Jammed Sheet, Fed Manually .")
→P.1018
After a roll was advanced, the paper was manually
pulled out by force, closing the Paper Feed Slot. Remove the roll and open the paper feed slot.
(See " Removing the Roll from the Printer .")
→P.790
Cannot load sheets
Cause Corrective Action
The paper source selection is incorrect. Press the Load button and select the paper source.
Paper is not cut neatly
Cause Corrective Action
The paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.
Paper rises by the ends of the cut position be-
fore it is cut. Reload the paper correctly.
You are using paper that cannot be cut with
the Cutter Unit. Specify Manual in Cutting Mode in the Control Panel menu and use
scissors or a cutting tool to cut the roll after printing.
(See " Specifying the Cutting Method for Rolls .")
→P.797
Cut Speed is not configured correctly in the
Control Panel menu.
Change the Cut Speed setting in the Control Panel menu.
(See " Menu Structure .")
→P.904
During cutting, printed documents fall out at
an angle. In the Control Panel menu, set Cutting Mode to Eject . Hold docu-
ments after printing, as they are cut.
(See " Specifying the Cutting Method for Rolls .")
→P.797
Troubleshooting > Problems Regarding Paper >
iPF6300S Roll paper cannot be inserted into the paper feed slot
12
1021