Canon imagePROGRAF iPF6300S, Руководство пользователя

Страница: 936 / 1126

Setting Item Description, Instructions
Adjust
Printer Head
Posi.
Adj.
Auto(Expansion) The printer prints and reads a test pattern for automat-
ic adjustment of Printhead alignment relative to the
printing direction and spacing between nozzles and
colors. Adjustment is performed at a higher level of
precision than
Auto(Advanced) . (See " Automatic
Adjustment to Straighten Lines and Colors (Head
Posi. Adj.)
.")
→P.827
Manual Print a test pattern for adjustment of Printhead align-
ment relative to the printing direction. Enter the ad-
justment value manually based on the resulting pat-
tern.
(See " Manual Adjustment to Straighten Lines
and Colors (Head Posi. Adj.) .")
→P.829
Feed
Priori-
ty Adj.
Priori-
ty Automatic Specify exact paper feeding, if desired. Normally, se-
lect
Automatic . Choose Print Quality for attractive
printing. Choosing Print Quality also makes banding
less noticeable. Choose Print Length if you prefer to
feed the paper an exact amount. However, note that
slight banding may occur in the direction of carriage
scanning when
Print Length is selected.
Print Quality
Print Length
Adj.
Quali-
ty Auto(GenuinePpr) Specify this mode with paper identified in the Paper
Reference Guide.(See
Paper Reference Guide .)
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount.
(See "
Automatic
Banding Adjustment (Adj. Quality) .")
→P.834
Auto(OtherPaper) Specify this mode with paper not in the Paper Refer-
ence Guide.(See
Paper Reference Guide .)
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. Note that this func-
tion takes more time and consumes more ink than
Au-
to(GenuinePpr) .
(See "
Automatic Banding Adjust-
ment (Adj. Quality)
.")
→P.834
Manual Use this mode with highly transparent media or other
paper for which
Auto(GenuinePpr) or Auto(Other-
Paper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper.
(See " Manual Banding
Adjustment (Adj. Quality) .")
→P.836
Adjust
Length Ad-
just-
ment-
Print A:High Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment.
(See " Ad-
justing Line Length (Adjust Length) .")
→P.838
B:Standard/Draft
Chang
e Set-
tings A:High Displayed when you have selected Feed Priority >
Adj. Priority > Print Length .
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from
Adjustment-
Print or the discrepancy that you measured (as a per-
centage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount
by choosing a lower adjustment value.
B:Standard/Draft
Control Panel > Printer Menu >
Menu Settings iPF6300S
9
918