Canon CXDI-40G COMPACT, Руководство по обслуживанию

Страница: 88 / 189

2
2
.
.
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
- 68 -
Parameter List (Separate Document 1)
DICOM storage device
In the CXDI, DICOM data transfer is performed using the transfer software module
“send_image” .The settings for these parameters are described below.
Parameter Meaning Description
-m maxPDU
Maximum PDU value in
byte units * The CXDI automatically
uses 131072 internally for
operation.
* Designating a specific value
allows overwriting of the
above value.
* The DICOM standards do not allow
values of 1301073 or higher to be set.
* This is used when the operator who
manages the connected storage device
requests a size change.
* In DICOM printing, note that the
argument title changes to -u.
(
Æ See the printing parameters.)
-t calledTitle
Called App Entity Title * The AE Title setting field is
automatically applied to this
setting.
* Designating a specific value
allows overwriting of the
above value.
* Note that the meaning is opposite of the
DICOM printing argument -t.
( Æ See the printing parameters.)
* The entry for the OPU output device
title is used here.
-c callingtitle
calling App Entity Title * The CXDI automatically
uses CANON_CCR
internally for the operation.
* Designating a specific value
allows overwriting of the
above value.
* Note that the meaning is opposite of the
DICOM printing argument -c.
(
Æ See the printing parameters.)
* This is used when the operator who
manages the connected storage device
requests a change in the installed
identification information (version).
-s SOPName
(for reference)
This parameter designates
whether class be connected
for performing association
at the beginning of
transfer.(CR/T/MR/NM/S
C/US) * This is not used in the
CXDI.
-I
A-RELEASE-RES is
ignored. * This parameter is used
simply as “-I”
* This is used when the error message
“130012 Peer aborted Association (or
never connected)” occurs even though
the DICOM data transfer was
successful.
Æ This is used differently based on the
connected storage devices.
-d FAC
This parameter dumps a
specific facility log.
(DCM/DUL/SRV) * This parameter is used
simply as “-d”
* This parameter is used to
make the transfer software
put the debugging character
string on the console.
* This parameter does not affect DICOM
data transfer.
* This parameter outputs the CXDI log
based on Windows NT.