Canon CXDI-40G COMPACT, Руководство по обслуживанию

Страница: 182 / 189

5.Troubleshooting
- 7 -
2.4.3 When the Hard Drive Crashes
Recover the system using the following method when the hard drive crashes.
1) Replace the crashed hard drive with the hard drive provided in item B above, “Backup
method using a hard drive”.
* Copy \Ccr from the original hard drive to the new hard drive when the D drive in the
crashed hard drive is in a normal state (a problem case caused by the OS).
Note: Perform Step 2 after upgrading if the CXDI version you are using is newer than that
in the hard drive provided by copying from hard drive to hard drive during system
installation.
(Files such as Str.ini are not compatible when the CXDI version is different.)
* When the hard drive has crashed mechanically, proceed to Step 2 and subsequent steps.
2)
Upon completion of the replacement, to restore the user operating environment, copy the
Bodyparts folder and all ini files stored on the floppy disk into d:\ccr, thus overwriting
the existing data in it.
That images captured by users cannot be inherited in this case.
Note: Calibration is required when the system has been used for over one year.
Note: Perform Step 2 after upgrade if the CXDI version you are using is newer than that in
the hard drive provided by copying from hard drive to hard drive during system
installation.
(Files such as StrTable.ini are not compatible when the CXDI version is different.)
2.4.4 When Problems Occur in Driver Software
When drivers such as the touch panel driver are damaged, reinstall the appropriate drivers
by referring to “C3S Service Manual”.