Canon CXDI-31, Руководство по обслуживанию

Страница: 77 / 209

2 Installation Manual
- 51 -
C. Press the “SET” button, and input the parameters.
(Normally, the parameters need not be set. They must be input only when the need
arises.)
* A space must be input between each of the parameters.
[Fig 5]
D. After setting the output destinations, follow the procedure below to check whether images
can actually be transmitted. Return to the user menu, capture a sample image (one X-ray
image), and transmit the image to the printer and storage. There are two errors that may
result if the image cannot be transmitted:
a. “DICOM Connect Error. Cannot connect to the target. Check network or port number
setting. Retry?”
b. “DICOM Transfer Error. Error occurred during the association. Retry?”
Message a indicates that connection at the TCP/IP level is not possible and that the
physical connections or the subnet mask and other settings must be checked again.
Message b indicates that communication at the TCP/IP level is problem-free but that
DICOM level communication has failed. In this case, check again that AE_TITLE of
CXDI has been sent properly to the transmission destination and that the IP address, port
number and AE_TITLE of the transmission destination which are set with CXDI have
been set properly.
* Upper-case letters are used to input “AE_TITLE” of the transmission destination.