Canon CXDI-31, Руководство по обслуживанию

Страница: 129 / 209

2 Installation Manual
- 103 -
8) When CCR SETUP MENU appears, press the [Esc] key to return to Welcome to CCR.
9) In Welcome to CCR, select “8 – Exit” and quit the CXDI application.
10) After returning to the Windows NT desktop, call up the command prompt.
Start Æ Program Æ Command Prompt
11) When C:\> appears, type “d:” on the keyboard, and then press the [Enter] key.
12) When D:\> appears, type “cd ccr’” on the keyboard, and then press the [Enter] key.
* “ ” indicates a space.
13) When D:\ccr> appears, type “ccr**** /np” on the keyboard, and then press the [Enter]
key.
(“****” varies according to the version of the CXDI application.)
14) When the CXDI application program is starting up, message “There is no BodyPart for
SensorID#1. Create STAND TYPE BodyPart If you need to change the type, push cancel
button, set custom type in the console 1-1-7setting menu and restart.” will be displayed if
/np mode is used with a different setting. Click [OK].
(* differs according to the type of the sensor.)
(4) Going out of /np mode
Connect the sensor unit to the control PC.
Before using the system in normal condition, perform the following steps:
1) Return the items changed in step 7) to their original settings.
2) If /np mode has been used with a different setting as that of the connected sensor, as
mentioned in “(3) Notes”, delete the BodyPart**.ini file made in the BodyParts folder,
and return the BodyPart**.ini file which has been moved into the BodyParts folder.
3) Register the ccrstart.bat file to the StartUp.