Canon ColorWave 3800, Руководство по эксплуатации

Страница: 31 / 358

The take-up module (optional) and the Roll Wind module (optional)
Introduction
The ColorWave 3800 is compatible with the optional take-up module and Roll Wind module.
The take-up module and the Roll Wind module allow the user to print in roll-to-roll mode. The
module rolls up your print jobs automatically on a core without cutting. This can be handy when
you want to transport your prints or want to automatically clean-cut or trim your prints, laminate
or mount an adhesive back to the prints.
Before you can use the take-up module, you must first set the printer into the roll-to-roll mode.
You can enable the roll-to-roll mode in WebTools Express and on the user panel, see
Configure
the roll-to-roll mode in WebTools Express
on page 138 and
Configure the roll-to-roll mode
on
page 31 .
By default, the printer is delivered in roll-to-sheet mode. In this mode, the machine cuts and
delivers each print to the selected delivery destination.
Configure the roll-to-roll mode
Introduction
When you want to use the take-up unit, your printer has to be in the roll-to-roll mode. When you
enable the roll-to-roll mode, the printer will not cut between pages. You can also configure the
roll-to-roll mode in WebTools Express.
NOTE
• When the roll-to-roll mode is enabled, each print job is delivered to the [Back output]; even
when you set the [Top delivery tray] as output location for your prints.
• To calibrate the printer the roll-to-roll mode must be disabled.
• When the printer is in roll-to-roll mode, you have to cut the media before you can replace a
toner cartridge.
Procedure
1. Tap on the system menu thumbnail. The system menu opens.
2. Tap on [Roll-to-roll option] in the list in the right part of the display.
3. Log in as a Key operator.
4. Select [Roll-to-roll disabled] or [Roll-to-roll enabled].
5. Tap [Ok] to confirm, or [Cancel] to reject your entries.
The take-up module (optional) and the Roll Wind module (optional)
Chapter 2 - Get to know the printing system 31