Canon ColorWave 3800, Руководство по эксплуатации

Страница: 133 / 358

Configure the working hours
Introduction
You can define the working hours of the printer in WebTools Express.
Enable [Automatic on] first, to let the printer wake up automatically. Define the working days with
the [First workday] setting, for example 'Monday', and [Last workday] setting, for example
'Friday'. And set the wake up time and shut down time with the [Start-up time] and [End of
workday time] settings, for example '06:30' and '19:00'.
That way the printer turns on and off automatically, at the set day and time.
NOTE
Even if [Automatic on] is disabled, the [End of workday time] setting is active and causes the
printer to automatically switch off at the selected time (due to power saving regulations, the
printer must always shut down once in twenty-four hours).
NOTE
If the printer was manually powered on outside the defined working hours, the printer will
automatically switch off instead of going to sleep mode after the selected [Go into sleep mode
after] period has elapsed.
Procedure
1.
Open the [Preferences] - [System defaults] tab.
2.
Click on [Edit] in the [Printer properties] section.
3.
Set the [Automatic on] setting to [Enabled].
4.
Set the [Start-up time], [End of workday time], [First workday] and [Last workday] settings
according to your preferences.
5.
Click [Ok] to confirm, or [Cancel] to reject your entries.
Result
The printer now wakes up automatically, and is active during the preferred time frame on the set
days.
Configure the working hours
Chapter 3 - Define your workflow with WebTools Express 133