Canon ColorWave 3800, Руководство по эксплуатации

Страница: 171 / 358

Stages in the process of making a color print Priority
WebTools Express offers 4 default paths for color settings, based on the file type
of the document:
• [HP-GL/2 - Color management settings]
Color management settings for HP-GL, HP-GL/2 and HP-RTL files
on page 172
• [TIFF and JPEG - Color management settings]
Color management settings for TIFF and JPEG files (RGB input) on page 173
Color management settings for TIFF and JPEG files (CMYK input) on page 174
• [PostScript - Color management settings]
Color management settings for PostScript files (RGB input) on page 175
Color management settings for PostScript and PDF files (CMYK input) on
page 176
• [PDF - Color management settings]
Color management settings for PDF files (RGB input)
on page 177
Color management settings for PDF files (CMYK input)
on page 178
Color management settings for PDF files (Gray input)
on page 179
These settings are applied when the controller cannot recognize or detect any
color settings for the file to be printed.
4
NOTE
It is advisable to align the color management settings that have been made in the different
stages before you start the print job. The color space of the document and the settings for the
print have to match. This means that if you have set the color settings in more than 1 stage of
the process described above, you must check if the color settings do not counteract with each
other.
Priorities in the color management settings
Chapter 3 - Define your workflow with WebTools Express 171