Canon ColorWave 3800, Руководство по эксплуатации

Страница: 148 / 358

Set the automatic roll switch
Introduction
In WebTools Express you can select an automatic roll switch setting:
• [Roll empty: when a specific roll number is set]
You can choose one of the following actions:
• [Switch to a similar roll (same type, same size)]
The printer automatically continues printing on an identical (size and media type) roll when
the selected roll runs out of media. If no identical roll is available, the job is stopped and the
printer requests to load new media.
• [Always ask to replace the empty roll]
The job is stopped and the printer requests to load new media.
This setting has no influence on jobs for which only a media size was selected. For these jobs,
the Media Selection Policy determines if a new roll can be selected.
Procedure
1. Open the [Preferences] - [System defaults] tab.
2. Click [Edit] in the [Printer properties] section, or click on the setting [Roll empty: when a specific
roll number is set].
3.
Select the desired action.
4.
Click [Ok] to confirm, or [Cancel] to reject your entries.
Set the automatic roll switch
148 Chapter 3 - Define your workflow with WebTools Express