Canon ColorWave 3800, Руководство по эксплуатации

Страница: 240 / 358

Recommended settings for copy jobs
Introduction
Use the advised settings to optimize the output of your copy job.
Dependent of a color or grayscale copy job, select the corresponding settings.
Workflow
1. Start by selecting the best image preset for your job. Use column two in the table below, or
for more information see
The Image preset for copy jobs
on page 229 .
2. When you want to further optimize the settings, you can select the advanced settings, under
[Show all settings] on the user panel. When you want to influence the imaging process and
thus optimize the output quality, you can select the corresponding [Original type] for your job.
Use column three in the table below, or for more information see
Advanced settings for copy
jobs
on page 230 and
The original type
on page 242 .
Advised settings for color copy
Original document [Image] preset Optimize under [Show all settings]
(Folded) CAD drawing [Fast CAD]
with large area fills:
[Normal color] • For folded originals set the origi-
nal type to [Folded lines/text]
• When you want to emphasize col-
ors, set [Color highlighting] to
[On].
(Folded) CAD drawing with
marks from marker pens [Fast CAD].
with large area fills:
[Normal color] • For folded originals set the origi-
nal type to [Folded lines/text]
• When you want to emphasize col-
ors, set [Color highlighting] to
[On].
Map, GIS, business graph-
ics, etc. [Normal color]
Architectural impressions,
artwork etc. [Normal color] Set original type to [Artwork]
Photos, posters, and high
definition color prints [Photo/Poster]
Medium quality color
prints [Normal color]
Advised settings for grayscale copy
Original document Preset [Image] Optimize under [Show all settings]
(Folded) CAD drawing [Fast CAD B/W]
with large area fills:
[Normal CAD B/W] For folded originals set the original
type to [Folded lines/text]
4
Recommended settings for copy jobs
240 Chapter 4 - Use the printing system