C8000 Battery Testing System User Manual
68
channel. You can specify the capture rate (5-100 readings per
second).
If the
Save Results Data
option is enabled, the C8000 saves test
results for each completed test. This is open default to ON.
If a power failure occurs while a test is executing, and the power is
restored within the specified timeout, the interrupted test will be
resumed. To disable this feature, set the
Resume Hours
value to 0
(default value). To enable this feature, set the
Resume Hours
field
to any other value.
1.
From the
Main
screen, select
System
and press
ENTER
. The
System Options
screen appears.
2.
From the
System Options
screen, select
Options
and
press
ENTER
. The
System Options
screen appears.
3.
To save termination data, select
Yes
.
4.
To save results data, select
Yes
.
5.
Enter the number of hours before an interrupted test
will be resumed.
6.
Enter the number of minutes before the screen saver is
activated (the default value of 0 will disable this
option).
7.
To enable SnapLock/RigidArm Adapter auto import,
select
Yes
(the default is No).
8.
Enter the Low RDD in kilobytes. The default value of 0
means only a console error message is displayed when
space reaches zero bytes.
9.
Press
OK
.
