Cadex C8000, Руководство пользователя

Страница: 45 / 300

C8000 Battery Testing System User Manual
Battery Tester
33
Caution! Electrostatic Sensitive Device
Do not open the C8000 or touch any part of its internal
components if you are not grounded.
Do not attempt to open the C8000 while it is plugged
into an electrical outlet or any peripheral device.
Severe electrical shock to the operator and/or damage
to the C8000 could result!
For more information, see 1.1 Cautions and Warnings .
To replace the backup battery in the C8000:
1. Remove all batteries and adapters, turn off the C8000 and
unplug the power cord and I/O port cords.
Wait at least one minute before continuing.
Do not attempt to open the C8000 while it is
plugged into an electrical outlet or any
peripheral device. Severe electrical shock to
the service person and/or damage to the
C8000 could result!
2. Use a Phillips screwdriver to remove the following screws:

Two screws on the right side.

Two screws on the back panel.

Two screws on the left side.

One screw on the top.
3. Remove the top cover by sliding it back slightly and then lifting .
The backup battery is located at the back of the C8000, in
front of the expansion slot and between two fans.
4. Move the upper clip of the battery holder out of the way.
5. Using your fingers or insulated pliers or tweezers, gently
pull the old battery out of the holder. Be very careful not to
damage the battery.
Do not use pliers or tweezers with bare
metal tips. They will short the battery and
could cause it to explode
.