Cabletron Systems SSIM-A2-01, Инструкция по установке и эксплуатации

Страница: 20 / 88

11
SmartStack SSIM-A2-01/SSIM-A8-01 Installation
Cabling
The cabling used depends on which version of the module you are installing.
SSIM-A2-01 ATM 155 Uplink UTP5
The SSM-A2-01 module uses standard copper UTP5 cabling. The maximum cable
length is 100 m (328 feet).
1. Insert the modular jack from either end of an RJ45 UTP-5 cable into the
connector on the SSM-A2-01 front panel.
2. Connect the other end of the cable to an ATM switch in the network.
SSIM-A8-01 ATM 155 Uplink MMF
The SSIM-A8-01 module uses multimode 62.5/125 micron fiber cabling. The
maximum cable length is 2000 m (6560 feet).
1. Connect an SC-type optic fiber to the pair of SC-type connectors on the front
panel of the module. To ensure proper connection, it may be necessary to clean
the fiber connectors with a soft tissue dipped in alcohol.
2. Connect the other end of the cable to an ATM switch in the network using the
following guidelines:
— Connect the module RX connector to the ATM switch TX port.
— Connect the module TX connector to the ATM switch RX port.
➽
Note: If there is no connection between the ATM switch and the SSIM-A8-01
module (the RXSYNC LED is off), try swapping the TX and RX connectors at one
end of the cable.