Cabletron Systems SSIM-A2-01 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 88

Cabletron Systems SSIM-A2-01 Скачать руководство пользователя страница 58

49

SmartStack SSIM-A2-01/SSIM-A8-01

Statistics

ARP Replies Rx

The number of LE_ARP_RESPONSEs received by the LEC from the ATM
network. The counter includes both solicited and unsolicited replies. Replies may
arrive on the Control Direct VCC or on the Control Distribute VCC, depending on
how the LES is implemented. This counter covers both VCCs.

ARP Replies Tx

The number of LE_ARP_RESPONSEs transmitted by the LEC on this VAP.

Control Frames Rx

The total number of control packets received by the LEC on this VAP.

Control Frames Tx

The total number of control packets sent by the LEC on this VAP.

SVC Failures

The total number of
a) outgoing LAN Emulation SVCs that the client tried to open and failed
b) incoming LAN Emulation SVCs that the client tried to establish and failed, and
c) incoming LAN Emulation SVCs that the client rejected for protocol or security
reasons.

# Least Act VCC Disc

The number of times the VCC table has been full, and the least active VCC has been
disconnected on this VAP.

# No Least Act VCC Found

The number of times the VCC table has been full, and no least active VCC could
be found.

Long Frames

The number of frames received from the ATM network that exceeded the
configured maximum frame length.

Duplicate Ring Number

The number of times a frame containing a duplicate ring number in the RIF field
has been detected on the ATM network.

Ring Number Mismatch

The number of times an incoming frame did not include the VAP’s ring number
correctly.

«
...
56
57
58
59
60
...
»

Содержание SSIM-A2-01

























































































Отзывы:

Нет отзывов