
14
SmartStack SSIM-A2-01/SSIM-A8-01
Installation
Configuration
The SSIM-Ax-01 module can be configured using the RS-232-based console
configuration, Telnet, or the SNMP-based management application. (The SNMP-
based management application is described in the online help).
Default Configuration
When the module is inserted for the first time, the module will be configured with
the default configuration, as described below:
•
One VAP in the default CRF.
•
LANE services using the LECS address configured in the switch, subsequently
LECS at the LANE well-known address.
•
The ELAN name will be empty.
•
The maximum data frame size is 4544 (and the LAN type is Token Ring).
•
The signaling version is UNI 3.1.
•
The framing type is SONET.
You will need to reconfigure the module in the following cases:
•
If you want to change any of the defaults listed above.
•
If you want to change any of the more advanced parameters not listed above.
•
If you want to connect other CRFs than the default CRF to ATM.
❏
Содержание SSIM-A2-01
