Cabletron Systems SSIM-A2-01 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 88

background image

i

Notice

NOTICE

Cabletron Systems reserves the right to make changes in specifications and other information contained in this
document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether
any such changes have been made.

The hardware, firmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL, INDIRECT,
SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO
LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR THE INFORMATION
CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN ADVISED OF, KNOWN, OR
SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH DAMAGES.



1999 by Cabletron Systems, Inc., P.O. Box 5005, Rochester, NH 03866-5005

All Rights Reserved
Printed in the United States of America

Order Number: 9032990-01 October 1999

(OC-7062 v.1.1, 710001815)

Cabletron Systems, SPECTRUM, LANVIEW, and MicroMMAC are registered trademarks and
SmartSwitch and SmartStack are trademarks of Cabletron Systems, Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment uses, generates, and
can radiate radio frequency energy and if not installed in accordance with the operator’s manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause interference in which case the user will be required to correct the interference at his own expense.

WARNING: Changes or modifications made to this device which are not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

«
1
2
3
4
...
»

Содержание SSIM-A2-01

























































































Отзывы:

Нет отзывов

Похожие инструкции для SSIM-A2-01

Express EtherNetwork DFE-670TXD

Бренд: D-Link Страницы: 4

Бренд: DAD Страницы: 36

Бренд: D-Link Страницы: 2

Бренд: D-Linke Страницы: 32

Бренд: T&D Страницы: 122

Бренд: Lanner Страницы: 2

Бренд: SeaLevel Страницы: 17

Бренд: NetBurner Страницы: 15

Бренд: EnGenius Страницы: 3

DesignCore RVP-TDA3 Series

Бренд: D3 Страницы: 34

Бренд: ZKTeco Страницы: 68

Бренд: Idis Страницы: 17

IGS-5225-20T4C2X

Бренд: Planet Страницы: 16

Бренд: Maipu Страницы: 26

Бренд: ZyXEL Communications Страницы: 3

Бренд: 3Com Страницы: 53

Бренд: iNetVu Страницы: 20

Бренд: H3C Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды