Cabletron Systems SSIM-A2-01, Инструкция по установке и эксплуатации

Страница: 21 / 88

12
SmartStack SSIM-A2-01/SSIM-A8-01 Installation
LEDs
There are four LEDs on the front panel of the SSIM-Ax-01 module. The LEDs
show the module status and activity. Table 2 explains the status LEDs on the left of
the module front panel, and Table 3 explains the ATM interface LEDs on the right
of the module front panel.
Table 4 shows the LED status for the SSIM-Ax-01 module under normal operating
conditions.
LED Position State Meaning
DIAG (green) Top On Diagnostics are in progress
Off No diagnostics are in process
ERR (yellow) Bottom On A module failure has
occurred
Off The module is working
correctly
Table 2. Status LEDs and their Meanings
LED Position State Meaning
RXSYNC (green) Top On The ATM interface is
receiving a signal
Off The ATM interface is not
attached to a live transmitter
SIGLOSS
(yellow) Bottom On The ATM receive signal is
below an acceptable level
Off The ATM receive signal is
acceptable
Table 3. ATM Interface LEDs and their Meanings